LC-8 Lab Centrifuge with 8 x 15ml rotor
Benchmark’s LC-8 series of laboratory centrifuges is uniquely designed to meet a wide range of applications in both the clinical and research laboratory. An eight position rotor is included and designed to directly accept 10ml and 15ml test-tubes (conical or round bottom), while optional adapters are also available for use with all popular sizes of blood collection and culture tubes. Unlike most compact centrifuges in this class, the rotor can be easily removed from the chamber for cleaning.
The back-lit, liquid crystal display provides full control over the set run time and rotational speed. The rotational speed can be set/viewed in rpm or rcf and acceleration/deceleration levels can be easily adjusted in the advanced settings mode.
To ensure safety, the digital microprocessor ensures that the lid has been closed and that the safety lid lock is engaged prior to starting a centrifugation cycle. In addition, an advanced imbalance detection system constantly monitors the balance and vibration, automatically bringing the rotor to a stop if an imbalance is detected.
The back-lit, liquid crystal display provides full control over the set run time and rotational speed. The rotational speed can be set/viewed in rpm or rcf and acceleration/deceleration levels can be easily adjusted in the advanced settings mode.
To ensure safety, the digital microprocessor ensures that the lid has been closed and that the safety lid lock is engaged prior to starting a centrifugation cycle. In addition, an advanced imbalance detection system constantly monitors the balance and vibration, automatically bringing the rotor to a stop if an imbalance is detected.
Information: Specifications:
- Digital Speed control up to 5,000 rpm
- Safety lid-lock, prevents opening lid until rotor stops
- Unique air-flow design keeps samples cool
- 8 tube capacity, for tubes up to 15ml
- Speed: 400-3500 rpm / 1500 xg (400-5000 rpm / 3070 xg)
- Capacity: 8 x 15 ml
- Accel / Decel: 9 sec. / 25 sec.(19 sec. / 39 sec.)
- Speed increment: 100 rpm or 100 rcf
- Timer: 20 sec. to 99 min. / cont.
- Momentary: Yes
- Dimensions: 29.5 x 36.5 x 21 cm
- Weight: 6.8 kg
Z327 Universal Centrifuge & Z327-K Refrigerated Universal Centrifuge
Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide!
Information: Specifications:
- Swing out rotors accept up to 4 x 200 ml (16 x 15 ml or 8 x 50 ml)
- Swing out plate rotor accepts deepwell plates
- Extremely versatile, 17 rotor options
- Refrigerated model available (Z327-K)
- High speed rotors (up to 23,542 xg)
- Fixed angle rotors from 0.2 ml up to 85 ml
- Speed: 200 to 18,000 rpm
- Max. RCF: 23,542 xg
- Max. Capacity: 4 x 200 ml
- Timer: Up to 99 hr, 59min and continuous
- Programs: Up to 99
- Dimensions: 40 x 48 x 36 cm & 40 x 70 x 36 cm for refrigerated
- Weight: 43 kg & 60 kg for refrigerated
4 x 750ml High Capacity Centrifuge Z446 Series
4 x 750ml Refrigerated High Capacity Centrifuge Z446-K Series
The Z446 universal centrifuge series offers the highest capacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 xg with full loads of up to 28 x 50ml, 68 x 15ml tubes, and up to 20 x microplates.
Advanced microprocessor controls allow for instant rotor identification,which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display.
Advanced microprocessor controls allow for instant rotor identification,which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display.
Information: Specifications:
- HIGH CAPACITY 4 x 750ml swing out rotor,
- – Up to 68 x 15ml or 28 x 50ml
- Ideal for Tissue Culture applications
- Advanced programming with automatic rotor recognition
- Speed: 200 to 16,000 rpm
- Max. RCF: 24,325 xg
- Max. Capacity: 4 x 750ml
- Temp. Range: -20°C to 40°C (Z446-K only)
- Timer: Up to 99 hr, 59min and continuous
- Dimensions: 54.1 x 67 x 39.1 cm & 72.9 x 67 x 39.1 cm for refrigerated
- Weight: 79 kg & 111 kg for refrigerated
.jpg@webp)
.jpg@webp)
.jpg@webp)